Casio WSD-F20 User Manual

Basic Operations You Should Remember
Important!
●
Note that the operations described here are subject to change due to the
type and version of the operating system being used by the smartphone
connected with
the watch, changes that occur when the watch’s operating
system is updated, and other factors. For details about Android Wear
operations, visit the website below.
https://support.google.com/androidwear/
Button Functions
Power button
●
Press to restore display brightness after it goes dark.
●
Pressing
while
a watch face is displayed will display the
App menu (app list for launching apps).
●
If watch
power is off, hold down the power button for at
least two seconds to turn the watch on.
TOOL button
(Top right)
●
Pressing while a watch face is displayed starts up a
previously specified app (TOOL under initial default
settings).
●
Each press of this button while TOOL is displayed
switches between TOOL functions.
APP button
(Bottom right)
Pressing while a watch face is displayed starts up a
previously specified app
*1
.
*1 Under WSD-F20 and WSD-F20S initial default settings, starts up Location
Memory.
Under WSD-F10 initial default settings, there is no app assigned
to this button.
Note
●
Visit the website below for information about changing the apps that are
started up by pressing the TOOL button and APP button.
https://support.google.com/androidwear/
EN-13

Casio WSD-F20 Specifications

General

Resolution	320 x 300 pixels
Touchscreen	Yes
Charging Method	Magnetic charging terminal
Memory	512 MB RAM
Processor	Qualcomm Snapdragon Wear 2100
Colors	Orange, Black
Display	1.32-inch dual-layer display
Operating System	Wear OS by Google
Water Resistance	50 meters (5 ATM)
Sensors	Accelerometer, Gyrometer, Compass, Pressure Sensor
Connectivity	Bluetooth 4.1, Wi-Fi
Weight	92 g
GPS	Yes
Storage	4GB
Battery	Lithium-ion
Battery Life	1-2 days (Smart Mode), 1 month (Timepiece Mode)