Casio WSD-F20 User Manual

Basic TOOL Operations
To do this: Perform this operation:
Change the
TOOL function
●
While the TOOL app is running, press the TOOL
button.
●
While the TOOL app is running, swipe the touch
screen from top to bottom, or from bottom to top.
Switch between
the two color
screens (A
and
B
) (See “TOOL
Function List”.)
To switch from screen A to screen B
, swipe the touch
screen from right to left. To switch from screen B to
screen A, swipe the touch screen from left to right.
Change TOOL
app settings
See “Common Outdoor Function Settings”.
TOOL App Color Display and Monochrome Display
You can switch the TOOL app screen between color display and
monochrome display. Outdoors in bright sunlight, the monochrome display
provides better readability than the color display.
To do this: Perform this operation:
Switch from the color display to the
monochrome display
Hold down the TOOL button for
about three seconds.
Switch from the monochrome
display to the color display
Hold down the TOOL button for
about
three
seconds or tap the touch
screen.
Note
●
While the TOOL app is running, it will shut down automatically after about
one minute of non-use.
●
“My
Graph”
TOOL app function cannot be displayed under the watch’s initial
default settings. For information about the operation required to display My
Graph, see “Using My Graph”.
EN-27

Casio WSD-F20 Specifications

General

Resolution	320 x 300 pixels
Touchscreen	Yes
Charging Method	Magnetic charging terminal
Memory	512 MB RAM
Processor	Qualcomm Snapdragon Wear 2100
Colors	Orange, Black
Display	1.32-inch dual-layer display
Operating System	Wear OS by Google
Water Resistance	50 meters (5 ATM)
Sensors	Accelerometer, Gyrometer, Compass, Pressure Sensor
Connectivity	Bluetooth 4.1, Wi-Fi
Weight	92 g
GPS	Yes
Storage	4GB
Battery	Lithium-ion
Battery Life	1-2 days (Smart Mode), 1 month (Timepiece Mode)