Casio WSD-F20 User Manual

Monochrome Display
Your watch has a dual-layer color and monochrome LCD. This section
summarizes when the monochrome display is displayed.
Watch Monochrome Displays
Your watch has the two types of monochrome display screens shown below.
(Lined) (Unlined)
The watch displays the monochrome display in the cases below.
After entering Timepiece Mode
The lined screen shown in ① will be displayed. See “Using the Timepiece
App”.
While Android Wear operation is stopped due to a low charge level
The lined screen shown in ① will be displayed until power is fully depleted.
In this state, all watch operations will be disabled and notification will not be
performed. Charge the watch as soon as possible when this happens.
Android Wear will automatically resume operation after the charge reaches
a prescribed level.
When the charge level drops below 5% or when the watch enters Doze
mode
The unlined screen shown in ② will be displayed. Tapping the touch screen
will
switch
to the color display. For details about Doze mode, visit the website
below.
https://support.google.com/androidwear/
EN-59

Casio WSD-F20 Specifications

General

Resolution	320 x 300 pixels
Touchscreen	Yes
Charging Method	Magnetic charging terminal
Memory	512 MB RAM
Processor	Qualcomm Snapdragon Wear 2100
Colors	Orange, Black
Display	1.32-inch dual-layer display
Operating System	Wear OS by Google
Water Resistance	50 meters (5 ATM)
Sensors	Accelerometer, Gyrometer, Compass, Pressure Sensor
Connectivity	Bluetooth 4.1, Wi-Fi
Weight	92 g
GPS	Yes
Storage	4GB
Battery	Lithium-ion
Battery Life	1-2 days (Smart Mode), 1 month (Timepiece Mode)