Auto Record (WSD-F20/WSD-F20S only) (AC)
Operation
1.
Use the Activity app to display the Snow
“BEGIN
” screen, and then tap
“BEGIN”.
2.
Swipe the touch screen from right to left as many times as necessary to
display the
“Settings” Screen. Next, tap D.
3.
On the setting menu that appears, swipe upwards and downwards until
“Auto Record” is displayed, and then tap it.
●
Each tap toggles between “
ON” and “OFF”.
Important!
●
The “Auto Record” setting can be modified only on the setting menu you
display using steps 1 and 2 above.
Description
This setting is related to the Activity app “Snow”. When
the setting of this item
is “ON”, the watch will start an activity measurement operation automatically
when operation by you is detected. When “OFF”, you need to start
measurement operations manually. The initial default setting is “OFF”.
Map Type (AC/MS/LM)
Operation
Each tap of this setting item toggles between “Google Map” and “Mapbox”.
Description
This setting lets you select either Google Map or Mapbox as the map type
displayed by the Activity app and Location Memory app.
Important!
●
Maps displayed while “Mapbox” is selected use geographic information
from OpenStreetMap. OpenStreetMap geographic information can be
freely edited
by anyone, which means that information displayed on a map
may not be correct.
Map Skin (AC/MS/LM)
Operation
Tap this setting item, and then use the list that appears to tap the name of the
map skin you want to use.
EN-55
To Next Page
Loading...
Need help?
General
