27
6.
Perform the operations described below as required.
The following operations can be performed while a slideshow is paused.
7.
To return to the file menu after the slideshow is complete, press the [ESC] key.
Projecting a Movie File
Use the Viewer Movie Mode to project movie files.
Note
Viewer supports playback of Motion JPEG format AVI movie files (see page 5 for details).
Playback of other format movie files is not supported.
The CD-ROM that comes with the Data Projector contains software (ArcSoft MediaConverter
3 for CASIO Projector) for converting some movie file formats to the supported format. For
information about installing this software, see “Installing the Software” (page 8).
To do this: Perform this operation:
Scroll back to the previous image Press the [] key.
Scroll forward to the next image Press the [] key.
Pause the slideshow (This option is available only
when “Auto” is specified for the “Image Switching”
setting on the setup menu.)
1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor
keys to move the highlighting to “Pause” and then
press the [ENTER] key.
Rotate the image right 90 degrees Press the [f ] key.
Rotate the image left 90 degrees Press the [Z] key.
To do this: Press this key:
Scroll back to the previous image []
Scroll forward to the next image []
Rotate the image right 90 degrees [f]
Rotate the image left 90 degrees [Z]
Resume the slideshow [O]
To Next Page
Loading...
Need help?
General
