To Next PageTo Next PageWhat to do if multiple USB devices are not recognized on Casio XJ-M255?
If some devices aren't recognized when connected to the Casio Projector via a USB hub or card reader, it's because the projector can only recognize up to four drives. Ensure that no more than four drives are connected at the same time.
What to do if my Casio XJ-M255 shows no image or an abnormal image?
If no image is projected or the projected image is abnormal on your Casio Projector, first ensure that the connected computer or video device is turned on and outputting a video signal. Next, select the correct input source on the projector that corresponds to the connected device. If you're using the component output terminal of a video device, connect it to the VIDEO or S-VIDEO terminal of the projector instead of the COMPUTER IN terminal.
Why is there no sound coming from my Casio XJ-M255?
If there is no sound from your Casio Projector, first check the volume level on the projector itself by pressing the remote controller [VOLUME] key and using [T] and [S] to adjust the volume level. Also, verify that the volume level of the device connected to the projector is not too low and that it is outputting audio. Ensure the audio output of the connected device is correctly connected to the projector’s AUDIO IN terminal or AUDIO IN L/R terminal. Finally, make sure the “Audio Out” setting is set to “Speaker” and not “Line” in the setup menu “Option Settings 2 J Audio Out”.
How to fix blurry text on a Casio Projector?
If the text is blurry on your Casio Projector, rotate the focus ring to focus the image. If that doesn't work, press the [AUTO] key to execute an automatic adjustment. If the issue persists, the frequency and phase may need adjusting in the “Image Adjustment 2 J Frequency” and “Image Adjustment 2 J Phase” settings on the setup menu. If the input source is a video camera or document camera, check to make sure there is no problem with the input source device.
Why does the remote controller not work with my Casio XJ-M255?
If the remote controller for your Casio Projector isn't working, first replace the batteries. If that doesn't solve the issue, ensure you are operating the remote controller within the allowable range of the projector.
How to fix viewer not appearing when connecting USB to Casio XJ-M255 Projector?
If the viewer doesn't appear when you connect a USB memory stick to the Casio Projector's USB port, it might be due to a few reasons. First, the USB memory might have a format that the projector can't recognize. To fix this, connect the USB memory to your computer and check if its file system is FAT or FAT32. If it isn't, reformat the USB memory to FAT or FAT32. Also, try using a different USB memory. Finally, check the 'Plug and Play' setting in the Data Projector’s settings.
What to do if some files are not displayed on Casio Projector?
If some folders or files are not displayed in the file menu of your Casio Projector, try reducing the number of folders and files in the folder.
Why image files do not appear in file menu on Casio XJ-M255?
If image files aren't showing up in the file menu of your Casio Projector, it could be because the Viewer is in the wrong mode. To fix this, make sure you're in Slide Mode. To enter Slide Mode, highlight 'Slides' on the main Viewer window and press the [ENTER] key. Also, ensure that your image files are in a compatible format. Image files need to have the following file name extensions: .jpg, .jpeg, .jpe, or .bmp.
What to do if Casio XJ-M255 Projector cannot play movie files?
If you cannot play movie files you select on the Movie Mode file menu of your Casio Projector, the file may be corrupted. Check the original file on your computer to see if it is normal. If it is, copy the original file to the memory device and try playing it again. If the message “This movie file cannot be played back.” appears, refer to “Viewer Error Messages”.
Why viewer does not appear when I connect USB to Casio XJ-M255 Projector?
If the Viewer does not appear when you connect a USB memory device to the Casio Projector's USB port, it could be due to the USB memory's format or the projector's Plug and Play setting. First, ensure the USB memory is formatted as FAT or FAT32 by connecting it to your computer and checking its file system. If it isn't, reformat it to FAT or FAT32. Also, check the projector's Plug and Play setting; if it's set to “Off”, change it to “On”.
General| Brightness | 3000 ANSI Lumens |
|---|---|
| Resolution | WXGA (1280 x 800) |
| Max Resolution | UXGA (1600 x 1200) |
| Aspect Ratio | 16:10 |
| Throw Ratio | 1.5 - 1.8:1 |
| Projection System | DLP |
| Screen Size | 30 - 300 inches |
| Lamp Life | up to 20000 hours |
| Weight | 3.9 kg |
| Lamp Type | Laser & LED Hybrid |
| Input Terminals | HDMI, VGA |
| Output Terminals | VGA (D-Sub 15) x 1, Audio (Mini Jack) x 1 |
| Operating Temperature | 5 - 35 °C |
