42
Keystone Correction +:
Raises the current keystone correction setting by 1.
KSP W 0 to 120
Keystone Correction –:
Lowers the current keystone correction setting by 1.
KSM W 0 to 120
Key: Operation executed when a key is pressed. KEY W 1: S, 2: T, 3: W, 4: X,
5: ENTER, 6: ESC, 10: FUNC,
11: MENU, 12: POWER,
13: AUTO, 14: INPUT,
15: TIMER, 16: ASPECT,
17: BLANK, 18: FREEZE,
19: ECO, 20: KEYSTONE +,
21: KEYSTONE –,
22: D-ZOOM +,
23: D-ZOOM –,
24: VOLUME +,
25: VOLUME –
Setup Type: Specifies how the projector is set up relative to
screen for projection.
0: Projection to a screen in front of the
projector*
1
1: Ceiling mounted projection from behind the
screen*
2
2: Projection from behind the screen*
1
3: Ceiling mounted projection to a screen in
front of the projector*
2
POS RW 0 to 3
APO: Used to change the Auto Power Off setting (trigger time
setting or Auto Power Off disable).
APO RW 0: Off, 1: 5 minutes,
2: 10 minutes, 3: 15 minutes,
4: 20 minutes, 5: 30 minutes
Error: Reads the projector error status. STS R 0: Normal, 1: Fan error,
2: Temperature error,
7: Light error, 16: Other error
Volume +: Raises the current volume setting by 1. VLP W 0 to 30
Volume –: Lowers the current volume setting by 1. VLM W 0 to 30
Mute: Switches mute on or off. MUT RW 0: Off, 1: On
*1 Top of projector upwards
*2 Top of projector downwards
Function
Command
Name
RW Setting Range