Casio XJ-V1 User Manual

7
Connect the projector to a power outlet and to an input source device.
Note
z For more information about component video connection, see “Connecting to a Component
Video Output” on page 32.
z For information about how to connect for RS-232C control of the projector, see “Projector
RS-232C Control” (page 39).
z For information about how to connect in order to update the projector firmware, see
“Updating Firmware” (page 33).
Connecting Projector Cables
Use an RGB cable to connect to the RGB output terminal of a computer or other input source.
Use an HDMI cable* to connect to the HDMI output terminal of a computer, video equipment,
or other input source.
Use the supplied power cord to plug
the projector into a power outlet.
* Be sure to use a High Speed HDMI cable.

Casio XJ-V1 Specifications

General

Matrix size	0.55 \
Number of colors	1.073 billion colors
Native aspect ratio	-
Projection distance	- m
Projection technology	DLP
Contrast ratio (dynamic)	20000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-30 -30 °
Focus	Manual
Offset	72 %
Throw ratio	1.54 - 1.71:1
Optical zoom	1.1 x
Focal length range	- mm
Light source type	Laser/LED hybrid
Service life of light source	20000 h
Full HD	No
Supported graphics resolutions	1200 x 1600, 1680 x 1056
AC (power) in	Yes
Composite video in	0
USB connector type	Micro-USB B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	37 dB
Noise level (economic mode)	35 dB
Placement	Desktop
Product type	Standard throw projector
Product color	White
Power source	AC
Power consumption (standby)	0.23 W
Power consumption (typical)	150 W
Operating temperature (T-T)	5 - 35 °C
Remote control type	IR

Weight and Dimensions

Width	270 mm
Height	89 mm
Weight	2800 g