HOW TO OPERATE
RECORD and PLAY
Press RECORD button on the remote control to set the Record mode on. A red ring
will appear around REC in the SYSTEM STATUS window. There will also appear
a red pause sign blinking on the TV screen, indicating readiness to record.
Play a song and sing along using MIC1 / MIC2 inputs. The music and the microphone
inputs will be recorded at 22KHz 16 bit Stereo Wav format. The red pause sign will
change to indicate the recording in process. You can record up to 99 songs.
When recording is completed, the red pause sign will return. Press RECORD button
to display the SYSTEM STATUS which will show how many recorded tracks are
currently stored under REC. Press RECORD again to set the Record mode off.
To listen to the recorded track, press a song number between 99901 - 99999 with the
last two digits matching the recorded track number. For example, for a recorded track
02, press 99902. Press PLAY to begin playback.
To erase the recorded track, press CLEAR to display the SYSTEM STATUS. Press
CLEAR again to delete the last recorded track.
To make an Audio CD from the recorded tracks, go to MENU and to 3. Disc Recording.
See the Chapter: Disc Recording in Section: Advanced Functions for the instruction.
To change the settings of the recording function, go to MENU and to 5. System Setup.
See the Chapter: System Setup in Section: Advanced Functions for the instruction.
To change the input volume level for recording, go to MENU and to 7. Audio Control.
See the Chapter: Audio Control in Section: Advanced Functions for the instruction.
To record from external audio source, please contact CAVS Technical Support.
20
39
To Next Page
Loading...
