Press MENU button to show the FUNCTIONS window. Use the / buttons to
move to 7. Audio Control and press button to enter.
1. Master Volume (1 / 2 / ... / 15)
Indicate the master music volume level. It is also controlled by the VOLUME UP and DOWN
buttons on the remote control. Normally, it is set at 15.
2. Master Mute (Off / On )
Select to mute on / off the master music output. It is also controlled by MUTE button on the
remote control.
3. WaveOut Volume (1 / 2 / ... / 15)
Indicate the wave output volume level. Normally, it is set at 15.
4. Synthesizer Volume (1 / 2 / ... / 15)
Indicate the MIDI output volume level. Normally, it is set at 15.
5. LineIn Volume (0% - 100%)
Indicate the music input volume level for recording. Normally it is set at 12%.
6. Microphone Volume (0% - 100%)
Indicate the microphone input volume level for recording. Normally it is set at 50%.
Audio Control
7
This chapter describes how to change the audio settings in JB-199.
HOW TO OPERATE
48
To Next Page
Loading...
