Press MENU button to show the FUNCTIONS window. Use the / buttons to
move to 5. System Control and press button to enter.
1. Play mode (Single / Continuous)
Select Continuous for songs in Repeat or Program to play without interruption. Select
Single for the songs to stop for a press of PLAY button to begin at the end of each song.
2. Score Control (On_Random_Low / Med / High / On_ADC_Low / Med / High)
Select between RANDOM scoring and ADC (advanced digital control) scorings.
Also select between LOW, MED, and HIGH average scorings.
3. Select Bill Acceptor (Off / Bill / Coin / Card)
Select a Bill, Coin, or Card acceptors.
4. Credit per $1 (1 / 2 / 3 ...)
Indicate the credit earned by inserting $1 (for use with bill acceptor).
5. Debit per Karaoke (1 / 2 / 3 ...)
Indicate the credit debited for each karaoke song (for use with bill acceptor).
6. Debit per Music (1 / 2 / 3 ...)
Indicate the credit debited for each music (jukebox) song (for use with bill acceptor).
7. Recording mode (None / Song to song / Stop to end)
Indicate the recording mode. The Song to song option records one song per track.
The Stop to end option records from the time the recording is turned on until the time
it is turned off in one track. When using Start to end, be sure to turn off the recording
after the recording has been completed. Normally, it is set to Song to song.
8. Recording Status (Save / Erase)
The default setting of Save stores the recorded tracks after JB-199 is powered off.
The Erase setting deletes the recorded tracks when JB-199 is powered off.
9. Load setup default
Press to reload factory default values to all settings.
System Control
5
This chapter describes how to change the system settings in JB-199.
HOW TO OPERATE
46
To Next Page
Loading...
