To transfer song files of JB-99 to JB-199,
1. Insert the hard drive of JB-99 into an external drive case with USB 2.0
connection.
2.
Power off the JB-199 unit. Connect the external drive case (with JB-99 hard
drive) to JB-199 using the USB connector. Power on the external drive case.
3. Power on the JB-199. From the initial Welcome screen, go to MENU and
to 4. Download.
4. Go to 2. Overwrite existing data and select Yes. Go to 3. Starting song number
and input a starting song number into which you wish to begin downloading.
5. Go to 7. Download from JB-99 and press to begin downloading. Approximately,
1,000 songs will download in 15 minutes.
6. Press STOP to stop the downloading. When stopped, the transferred songs from
JB-99 will be saved in group of 100 songs, and the last group of 100 songs
that was stopped will not be saved in JB-199.
Download song files from JB-99
8
The instruction below may damage the JB-99 hard drive for use in JB-99 unit.
Make a backup copy of the JB-99 hard drive before proceeding.
HOW TO OPERATE
JB-99 hard drive can also be directly connected to JB-199 by IDE cable located inside
the JB-199 player. Be sure to set the JB-99 hard drive as SLAVE for IDE connection.
49
To Next Page
Loading...
