OPERATING INSTRUCTIONS
Ofix VP v1.0EN
3. Description
• pH, RedOx analysis, water temperature and flow switch
• 2 built-in injection nozzles for pH corrector and residual / disinfectant
• RGB backlit analysis chamber
• User friendly smartphone app
• Wifi and Bluetooth connection
• Compatible with the Vigipool connected environment
3.1. Bluetooth® and Wifi control
The Ofix VP connected analyser has an embedded Bluetooth® and Wifi transmitter used to control your appliance from a
smartphone or tablet. To be able to control the data measured by the Ofix VP, you need an iOs (Apple®) or Android smartphone
or tablet running Bluetooth® Low Energy (v4.x) or Wifi 802.11 b/n/g. Other operating systems (Windows Phone®,...) or
devices not running the above-mentioned pre-requisites are not supported.
For a Wifi connection, the local Wifi details (SSID and password) need to be entered and a Vigipool account created to connect
your Ofix VP to the Wifi router and access the Ofix VP measurements from the internet.
3.2. iOs / Android apps
Android download App Store download
You can also search for Vigipool using the App Store and Play Store search engines
With Bluetooth, only one telephone / tablet can be connected to the control box at a time. To
connect from another device first disconnect the device which is already connected.
The software embedded in the appliance can be updated automatically. To do this, it must be
connected to WiFi or to another Vigipool appliance that is itself connected to WiFi. If you only
use the appliance with Bluetooth, you can create an access point from your phone to temporarily
connect the appliance and update its software if necessary.
3.3. Bluetooth® pairing
On the first connection (Bluetooth), after selecting your appliance from the list, in order to pair your smartphone with the Ofix
VP analyser, the smartphone must be moved into contact with the appliance, or press the button on the appliance once when
prompted by the app.
3
To Next Page
Loading...
Need help?
General