EasyManua.ls Logo

CDA DC740

CDA DC740
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Programming the Oven
Semi-automatic cooking
The main oven can be set to switch o automatically at a preset time
up to a maximum of 10 hours.
To set a semi-automatic cooking programme:
Select the oven function and temperature (the oven will switch on).
Touch until the cooking time indicator flashes.
Then touch or to select the required duration for the semi-
automatic cooking programme. When the correct duration
shows on the display, wait for approximately five seconds. The
cooking time indicator will remain lit to confirm the semi-automatic
programme is on.
When the cooking time is complete, there will be an alert beep
which will continue for two minutes and the cooking time indicator
will flash. To switch o the alert beep, touch any key.
Please note:
At the end of the cooking programme, remember to turn o the oven
manually.
Automatic cooking
The main oven can be set to switch on and o automatically at preset
times up to a maximum of 10 hours.
To set an automatic cooking programme, follow the steps for setting a
semi-automatic programme above, and then:

Other manuals for CDA DC740

Related product manuals