EasyManuals Logo

CDA hn6730 User Manual

CDA hn6730
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
preset period of time. When auto-heating has nished the power
will reduce to the level set.
If no nal power level is set, the auto-heat is switched o and the
zone will remain on power level “9”.
Timer
The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between a minimum of one minute
and a maximum of 99 minutes.
To set the timer
Switch on the hob.
Touch the “Power key” for the zone required.
Use the slider to select the power level required.
Touch the “Timer” display to select the timer: the “Zone timer
indicator” for that zone ashes.
Use the slider to select the units of the time required.
Touch the “Timer” display again to conrm the units setting.
Use the slider to select the tens of units of the time required.
Touch the “Timer” display again to conrm the tens of units setting.
The time is conrmed, the “Zone time indicator” stops ashing and
cooking starts.
At the end of the set cooking time the zone switches o, also the
“Timer” ashes “00” and the hob beeps.
To cancel the beeper: touch the “Timer” display once.
To cancel the timer
Touch the “Power key” for the zone.
Touch the “Timer” display to select the timer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA hn6730 and is the answer not in the manual?

CDA hn6730 Specifications

General IconGeneral
BrandCDA
Modelhn6730
CategoryHob
LanguageEnglish

Related product manuals