EasyManuals Logo

CDA hn6730 User Manual

CDA hn6730
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
Mains Electricity Connection
Warning! this appliance must be earthed
We recommend that the appliance is connected by a qualied
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.
This hob is intended to be connected to permanent fixed wiring by
a double pole switch, having a contact separation of at least 3mm in
all poles. The switch must be positioned no further than 2m from the
appliance.
Please note:
The mains cable must only be replaced by a qualied electrician
or service engineer and must be of equivalent or better rating (i.e.
2.5mm
2
, HO5V2V2/F).
This appliance is intended to be connected to the mains supply with
a cable of cross section area 2.5 mm
2
. A larger cable will not fit the
terminal connections.
The marking of the current rating of the fuse or circuit breaker
protecting this appliance should be marked on the socket outlet.
Assembly and electrical connection should be carried out by
specialised personnel.
When installing this product we recommend you seek the help of
another individual.
Ensure that the brass links are securely tted. Failure to do so will
prevent the hob from operating correctly.
Protection against live parts must be ensured after installation.
Connection data is printed on labels on the hob casing close to the

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA hn6730 and is the answer not in the manual?

CDA hn6730 Specifications

General IconGeneral
BrandCDA
Modelhn6730
CategoryHob
LanguageEnglish

Related product manuals