EasyManuals Logo

CDA hn6730 User Manual

CDA hn6730
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
To cancel the beeper: touch the “Timer” display once.
To cancel the minute minder
Touch the “Timer” display to select the timer.
Use the slider to reduce the units of the time to zero.
Touch the “Timer” display again to conrm the units setting.
Use the slider to reduce the tens of units of the time to zero.
Touch the “Timer” display again to conrm the tens of units setting.
The timer is now cancelled.
Residual heat indicators
The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after cooking. An “H” will show
in the relevant zone display after cooking until the zone is at a safe
temperature to touch.
In the event of a power cut, the residual heat indictors will illuminate
after the power supply is restored. However, when there is no power
supply to the hob the residual heat indicators will not work, so extra
care must be taken.
Please note:
You should avoid touching the zones when the hob is in use, or when
an “H” is showing on the zone display.
Pan detection
The hob is equipped with a sensor that will advise when the pan is
removed from the zone, or is unsuitable for use on induction hobs.
The zone display will show “U” until a suitable pan is placed on the
zone.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA hn6730 and is the answer not in the manual?

CDA hn6730 Specifications

General IconGeneral
BrandCDA
Modelhn6730
CategoryHob
LanguageEnglish

Related product manuals