26
• The inlet cable must be positioned so that it does not touch any of
the hot parts of the hob or oven.
Caution
• This appliance must only be connected to a 230V ~ 50Hz network.
• Observe the connection diagram.
• The connection box is located underneath at the back of the hob
casing. To open the cover use a medium screwdriver. Insert it in
the slits to open the cover.
Appliance electrical rating: 7400W
The following diagram shows the mains connection:
* Calculated using the diversity factor following the standard EN 60
335-2-6/1990.
Fig.6
AC 220-240V 50/60Hz 25A*
To Next Page
Loading...
