25
Mains Electricity Connection
Warning! this appliance must be earthed
We recommend that the appliance is connected by a qualied
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.
This hob is intended to be connected to permanent, fixing wiring by
a double pole switch, having a contact separation of at least 3mm in
all poles. The switch must be positioned no further than 2m from the
appliance.
Please note:
• The mains cable must only be replaced by a qualified electrician
or service engineer and must be of equivalent or better rating (i.e.
2.5mm
2
, HO5V2V2/F).
• The current rating of the fuse or circuit breaker protecting this
appliance should be marked on the socket outlet.
• Assembly and electrical connection should be carried out by
specialised personnel.
• When installing this product we recommend you seek the help of
another individual.
• Protection against live parts must be ensured after installation.
• Connection data is printed on labels on the hob casing close to the
connection box.
• As the appliance is not tted with an accessible plug, a means of
disconnection from the power supply must be must be included in
the fixed insatllation, in accordance with the installation regulations.
To Next Page
Loading...
Need help?
General
