What to do if cecotec Conga 1690 Vacuum Cleaner does not return to the charging base after spot cleaning?
After spot cleaning or changing its starting position, the robot will map and calculate a new route. Put the Cecotec Vacuum Cleaner robot back on the charging base manually.
General| Model | Conga 1690 |
|---|---|
| Category | Robot Vacuum Cleaner |
| App Control | Yes |
| Mop Function | Yes |
| Filter Type | HEPA |
| Wi-Fi Connectivity | Yes |
| Wet Mopping | Yes |
| Auto Recharge | Yes |
| Scheduling | Yes |
| Color | Black |
| Battery Type | Li-Ion |
| Control | App |
| Voice Control | Amazon Alexa, Google Assistant |
| Operating Modes | Auto, Edge, Manual |
| Programmable | Yes |
| Sensors | Anti-fall |
| Virtual Walls | Yes |
Instructions for setting up the robot and charging base, including required clearances.
Steps for correctly installing the wet and dry tank onto the robot.
Details the function of physical buttons on the robot for control.
Explains the most common cleaning mode for full house coverage.
How to activate the mode for the robot to return to its charging base.
Description of all buttons and their functions on the remote control.
Guide to setting the current time and scheduling cleaning sessions.
Introduction to the various cleaning modes available for the robot.
How to use the mode that cleans along the edges of rooms.
Instructions for cleaning a specific 2x2 meter area.
Details the mode where the robot cleans randomly.
Instructions for cleaning using gyro navigation.
How to perform two consecutive cleaning cycles.
Detailed instructions for the robot's scrubbing function and water intensity.
Instructions for manually controlling the robot's movement.
Highlights the benefits and features of using the Conga 1690 App.
Instructions for downloading the app and connecting the robot.
Guide to cleaning and maintaining the main brush and its compartment.
Instructions for emptying and cleaning the dust tank.
Instructions for cleaning and replacing the high-efficiency filter.
Guide to cleaning and recommended replacement of side brushes.
Instructions for cleaning the robot's free-fall sensors.
Common problems and their solutions for robot operation and connectivity.
To Next Page