Ceia 02PN8 HI-PE/CN-AS-140 User Manual

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

02PN8 HI-PE - 02PN7 --- Rev. FI 002 GB 60K10/16 v2_01

1

02PN8 HI-PE/CN-AS 02PN8 HI-PE/PN-AS-600 02PN7

METAL DETECTORS

02PN8 HI-PE/CN-AS-140

02PN8 HI-PE/CN-AS-140L

02PN8 HI-PE/PN-AS-600

02PN7

Installation and Maintenance

ATTENTION!

Keep the transducer matched with the electronics unit and the Technical Booklet having the same

serial number.

Program Version:

HI-PE v8_11 , 02PN7 V1_10

Rev.: FI 002 GB 60K10/16 v2_01

Date 2006-11-14

Table of Contents

Questions and Answers:

M
Madison JosephAug 7, 2025
What to do if Ceia 02PN8 HI-PE/CN-AS-140 Metal Detector doesn't alarm when metal is present?
- D
  Debra OliverAug 7, 2025
  If your Ceia Metal Detector isn't alarming despite metal objects passing through, even at the highest sensitivity, it could be due to a few reasons. First, check the power supply voltage using the Autotest procedure (only 02PN8 HI-PE). Also, inspect the transducer-electronics unit connections. Lastly, ensure the programming is correct and that the buzzer isn't off by setting AV>0. If the programming procedure isn't working, consider replacing the electronics unit.
C
cooklisaAug 13, 2025
Why does my Ceia 02PN8 HI-PE/CN-AS-140 Metal Detector power on and off repeatedly?
- C
  Crystal RiveraAug 13, 2025
  If your Ceia Metal Detector's power comes on and goes off repeatedly, it might be due to an unstable or low power supply voltage. Use a voltmeter to check the power supply voltage while the metal detector is powered on.
T
Tracy BurkeAug 19, 2025
How to fix a Ceia Metal Detector (02PN8 HI-PE) with a display off?
- M
  Miguel OlsonAug 19, 2025
  If the display is off on your Ceia 02PN8 HI-PE Metal Detector, and the detector is off, it could be a PW = OFF fault in the supply section. To resolve this, set PW = ON (only 02PN8 HI-PE) and check all the power connections, including the mains cable, the electronics unit to TX antenna connecting cable, and connector J2 on the electronics unit.
S
scott82Aug 26, 2025
What to do if the RCU display is off on a Ceia 02PN8 HI-PE/CN-AS-140 (02PN7)?
- R
  Robert FryAug 26, 2025
  If the RCU display is off on your Ceia Metal Detector (02PN7), there may be a fault in the supply section. Check all connections to the RCU, ensure the voltage at the RCU's power supply terminals matches that at the electronics unit. If the voltage is correct, consider replacing the RCU.
S
Sierra DavisAug 31, 2025
Why is passage detection failing on my Ceia 02PN8 HI-PE/CN-AS-140 (02PN8 HI-PE)?
- J
  jamiebarreraAug 31, 2025
  If your Ceia Metal Detector (02PN8 HI-PE) isn't detecting passages with its photocells, it could be due to a malfunction of the photocells. Ensure the GD function is correctly programmed. Also, check the photocells for dirt or defects using the Autotest procedure and replace them if necessary.

Ceia 02PN8 HI-PE/CN-AS-140 Specifications

General

Brand	Ceia
Model	02PN8 HI-PE/CN-AS-140
Category	Metal Detector
Language	English

Summary

Safety and Warranty Information

Safety Instructions

Crucial instructions and warnings for safe operation and maintenance of the device.

Symbols and Warranty

Explanation of manual symbols and details of product warranty terms.

Product Description and Guidelines

Operating Principle and Guidelines

Explains the detector's mechanism and provides useful usage parameters and considerations.

Installation and Assembly

General Installation and Compatibility

Basic notes on installation, EMC, and interference mitigation for optimal setup.

Mechanical and Electrical Assembly

Guidance on physical mounting, wiring, and connecting detector components.

02PN7 Detector: Operation and Programming

Instructions, Connections, and Commands

Covers usage, programming setup, commands, and installation checks for the 02PN7.

02PN8 HI-PE Detector: Operation and Programming

Instructions and Local Programming

Switching on, display messages, stand-by, and local programming procedures.

Advanced Programming and Checks

Remote programming, command reference, installation checks, and quality factor.

Technical Information and Support

Characteristics, Maintenance, and Appendices

Technical specs, troubleshooting, compatibility, CE conformity, and spare parts.

Related product manuals

Ceia THS/21E-3F

Preview: Ceia THS/21

Preview: Ceia HI-PE multi-zone Series

Ceia HI-PE multi-zone Series

Preview: Ceia THS/21E

Preview: Ceia THS/21E Series

Ceia THS/21E Series

Ceia HIPE /PTZ-WP