10 | CELESTRON ORIGIN
INSTRUCTION MANUAL
It is normal for the battery to display the fast-blinking “battery fault” pattern for a few seconds immediately after you plug it into external
power via the mount’s 12V power jack. You may also see the battery fault warning if the battery is too warm or cold to charge.
Pattern Meaning
Repeating stepwise increase in brightness
Battery charging
Steady On
Discharging (or fully charged if plugged in)
Slow Blinking Discharging and battery is low or critically low
Fast Blinking
Battery fault
Repeating stepwise decrease in brightness
Origin is completing its shutdown sequence and will shut
down in seven seconds.
Mount LEDs
There are two LEDs on the Origin mount—one faces outward behind the battery icon on the side of the mount, and the other faces
inward and conveniently illuminates the center of the mount itself (Figure 9). Only the LED behind the battery icon has status patterns.
The tray light is always on or off, depending on how you have configured it under Menu>Settings>Advanced in the app.
The battery icon LED on the mount indicates the power status:
Fig. 9: There are two LEDs on the Origin mount. The battery icon LED indicates power status.
TRAY LIGHT
BATTERY
ICON LIGHT
To Next Page
Loading...
