1. First, tap the StarSense icon. The app will ask you if your telescope is aligned.
If you removed your phone from the Dock since the last time you aligned, it’s probably a good idea to complete
the process again.
Press Needs Alignment to begin. It will only take a minute.
2. Tap any celestial object in the planetarium view to select it.
3. Not sure what you want to observe?
Tap the Star icon to view a list of Tonight’s Best objects. Tap any object in the list.
4. Once you select an object, its name will appear on the bottom of the planetarium view.
5. The bullseye indicates where the telescope is pointing.
6. Using the telescope’s slow-motion controls, follow the arrows to move the telescope towards the object.
7. As you get closer to the object, stop and wait several seconds so that the telescope can sense the stars in your
new location.
8. If the telescope has detected stars but is still not over your intended target, the bullseye will turn yellow.
Continue to follow the arrows closer to the target.
9. If you stop and wait for a few seconds and the bullseye turns green, you have successfully located your object!
It’s now ready to view in your low-powered eyepiece.
File Downloads
CELESTRON User Guide
StarSense, Explorer, CELESTRON
Download [optimized]
Download
Related Manuals
1. CELESTRON StarSense Explorer DX User Guide CELESTRON StarSense Explorer DX User Guide Quick Setup Guide:
Unpack...
2. CELESTRON StarSense EXPLORER LT User Guide StarSense EXPLORER LT 114AZ ITEM #22452 User Guide Unpack
your...
3. CELESTRON StarSense Explorer DX 130AZ User Guide 130AZ Quick Setup Guide ITEM #22461 Unpack your
telescope and...
4. CELESTRON StarSense EXPLORER LT Telescope User Guide CELESTRON StarSense EXPLORER LT Telescope
To Next Page
Loading...
