- 11 -
Installing two Permaport
®
Xpress
ports side by side.
When installing a pair of Permaport
®
Xpress
ports we recommend either joining them directly side
by side to one another or installing them with a significant gap between them to avoid entrapment of
anyone in the water.
When joining them side by side, additional consideration must be made for the selection of the dock
Brackets.
There are two different widths of dock bracket in the Hardware kit, 12”
wide and 10” wide. When joining ports side by side, the narrow brackets
(10” wide) have to go in the center of the pair. (If your kit has two narrow
brackets they can be used universally). The center Brackets must be
attached to the dock with no space between them
10” wide Bracket in both positions
To Next Page
Loading...