- 24 -
and attach using appropriate bolts or screws.
If using screws, use 3/8” diameter x 9” long
screws in the front 4 positions and 3/8” x 2
½” screws in the top 6 positions. If using
bolts, use 3/8” diameter and size the length of
the bolts to suit the deck it is being installed
on.
Using the step with a side by side
installation
The step may be used with side by side installations,
please ensure that the
Xpress port
have been installed
in accordance with the
Xpress
instructions regarding the
bracket widths for side by side installations.
Simply place both steps over the hardware and bolt down
in accordance with the instructions given in the section
regarding front mounting.
To Next Page
Loading...