Cellularline U-COM 8R - Troubleshooting; Fault Reset; Factory Reset

14
10. TROUBLESHOOTING
Please visit www.interphone.com for video tutorials and answers to
frequently asked questions.
10.1 Fault reset
When the intercom does not work properly, it is possible to reset the unit
easily, simply by disconnecting the battery for few seconds.
Note: Reset after error will not restore the intercom to factory settings.
10.2 Factory reset
To erase all of your settings and start fresh, the headset can be restored to
factory default settings using the Factory Reset feature.
UCOM16
UCOM8R
Bluetooth
UCOM16
UCOM8R
UCOM16
UCOM8R
Bluetooth
UCOM16
UCOM8R
GPS
UCOM16
Bluetooth
UCOM8R
5 sec
5 sec
5 sec
5 sec
x 1
x 1
x 2
x 3
TFT
UCOM16
Cascopilota
COLLEGAMENTI
UCOM8R
Bluetooth
®
devices pairing
Con guration
menu
Con guration
menu
Con guration
menu
Con guration
menu
Phone
pairing
Phone
pairing
Second
mobile phone
pairing
GPS pairing
Main phone pairing (to be done with unit on)
Second phone pairing (to be done with unit on)
Gps SATNAV & TFT pairing (to be done with unit on)
TFT
UCOM16
Rider’shelmet
CONNECTIONS
With U-COM 8R on, enter the conguration menu by pressing
CONFIRMATION button for 5 seconds. Be careful not to release the button
before the LED turns blue, you will hear the message conrming activation
of the conguration menu.
Press the VOLUME + button twice until you hear the message “Factory
reset”, press once the CONFIRMATION button to conrm. A voice
announcement will be issued to conrm: "Reset headphones, goodbye".