CEN-TECH 60431 User Manual

Page 10
For technical questions, please call 1-800-444-3353.
Item 60431
SAFETY OPERATION MAINTENANCESPECIFICATIONS
Maintenance Instructions
P
rocedures not specifically explained in this manual must
be performed only by a qualified
technician.
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
:
Unplug
the
charger,
disconnect any battery, and allow charger
to cool completely before performing any inspection, maintenance, or cleaning
procedures.
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
FROM TOOL FAILURE:
Y FROM TOOL FAILURE:Y
Do not use damaged equipment.
If
abnormal
noise or vibration
occurs,
have the problem corrected before further use.
1.
BEFORE EA
C
H USE,
inspect the general
condition of the charger. Check for:
•
loose hardware,
•
cracked or broken parts,
•
damaged electrical wiring or cable insulation, and
•
any other condition that may
affect its safe
operation.
2.
AFTER USE,
wipe external surfaces
of the tool with clean cloth.
3.
WARNING! If the supply cord of this
charger is damaged, it must be replaced
only by a qualified service
technician.
DO
NOT O
P
EN
C
HARGER HOUSING,
NO
USER-SERVI
C
EABLE
P
ARTS INSIDE.
PARTS INSIDE.P

CEN-TECH 60431 Specifications

General

Brand	CEN-TECH
Model	60431
Category	Battery Charger
Language	English