CEN-TECH 60431 - Warning Symbols and Definitions; Safety Alert Symbol and Hazard Definitions

Page 2
For technical questions, please call 1-800-444-3353.
Item 60431
SAFETY OPERATION MAINTENANCESPECIFICATIONS
Table of
C
ontents
Safety
.........................................................
2
Specifications
.............................................
6
Operation
....................................................
7
Maintenance
..............................................
10
Warranty
....................................................
12
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if
not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if
not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate
injury.
Addresses practices not related to personal injury.
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
CC
A
Cold Cranking Amps
R
C
Reserve Capacity
Ah
Ampere-hours
WARNING marking
concerning Risk
of
Eye
Injury.
Wear
ANSI
-
approved
splash
-
resistant safety goggles.
Read the manual before
set-up and/or
use.
WARNING marking
concerning Risk of
Fire.
Follow connection procedure.