7
600V
PEAK ZERO
KW
V
A
HOLD
OFF
600A600V CATIII
4.3 Resistance Measurement and Continuity Test:
Switch the main function to “
”
range, check the power line is
disconnected from the system.
Connect red test lead to “+” terminal and
black one to the “ COM ” terminal.
Connect tips of the test leads to the
points where the value of the resistance
is needed.
Read the result from the LCD panel.
If the resistance is under 100Ω, the
beeper will sound continuously.
Note:
When take resistance value from a
circuit system, make sure the power is
cut off and all capacitors need to be
discharged.
Short circuit Open circuit
600V
PEAK ZERO
KW
V
A
HOLD
OFF
600A
600V CAT
III
600V
PEAK ZERO
KW
V
A
HOLD
OFF
600A
600V CAT
III
To Next Page
Loading...
