Page 10 For technical questions, please call 1-800-444-3353. Item 98895
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under subheadings therein
before set up or use of this product.
Inspect tool before use, looking for damaged, loose, and missing parts.
If any problems are found, do not use tool until repaired.
Workpiece and Work Area Set Up
1. Designate a work area that is clean
and well-lit. The work area must not
allow access by children or pets to
prevent distraction and injury.
2. Route the air hose along a safe
path to reach the work area without
creating a tripping hazard or exposing
the air hose to possible damage.
The air hose must be long enough
to reach the work area with
enough extra length to allow free
movement while working.
3. Secure loose workpieces using a
vise or clamps (not included) to
prevent movement while working.
4. There must not be hazardous
objects (such as utility lines or
foreign objects) nearby that will
present a hazard while working.
Figure C: Components and Controls
Air Inlet
Air Regulator
Dust Collection Hose
Trigger
6" Backing
Pad
To Next Page
Loading...
