Important Safety Precautions
• To prevent an electrical shock, do not open the housing of the DVD player.
Dangerous voltages are present in these units.
• Do not expose the units to rain or excessive moisture. Do not spill any liquid onto
or into the units. Do not operate these products with wet hands.
• Never operate the product if it is moved from a cold environment to a warm one
(or vice versa) within a 60-90 minute period. Moisture may form inside the units and,
as a result, they may not operate correctly. Should this occur, turn on the power, take
out the disc, and wait at least 60-90 minutes for the moisture to evaporate.
• The DVD player is a CLASS 1 laser product and uses a visible laser beam that could
cause hazardous radiation exposure. Be sure to operate the player correctly as
instructed. To prevent hazardous exposure to the laser beam, do not place your eyes
close to the openings to look inside the player.
• Never put any foreign objects on the DVD tray of the player or any of the openings
of the DVD or screen as this may cause damage.
• There are no serviceable parts inside the DVD. In case of malfunction, only approved
and qualified service engineers should open the products. Opening the DVD by
unauthorised personnel will invalidate the warranty.
• To clean the DVD, disconnect the product from the power source. Use a dry cloth.
• DO NOT use any abrasive substances or alcohol-based products, as they may cause
damage.
Operating Precautions
• Avoid placing the product in direct sunlight, high temperatures, or areas with high
moisture.
• Operate in well-ventilated areas.
• Do not cover any ventilation slots.
• Do not turn the product on or off in short intervals. When turning the unit off, wait
for at least 10 seconds prior to turning the unit on again.
• Do not operate the player with scratched, bent, broken, or irregularly shaped discs.
CENDVDLFM Page 1