Removable front panel Rear view
EJECT BUTTON: Press to eject the disc.
LOADING THE BATTERY IN THE REMOTE CONTROL
1.Remove the battery holder in the direction indicated by the arrow.
2.Replace the battery with a new battery checking the (+)side is up as
illustrated.
3.Insert the battery holder. Push in the holder to the original position.
1.Old batteries must immediately be removed and disposed of.
2.Improper use of batteries may cause overheating, explosion or ignition.
Resulting in injury or fire .
3.Battery leakage may cause damage to the unit.
4.Do not disassemble or short the batteries.
5.Do not throw the batteries into fire.
6.To avoid the risk of accident, keep the batteries out of the reach of children.
CENDVDLFM Page 6
To Next Page
Loading...
