Centurion SD04 - Page 52

page 52
www.centsys.com
Learning procedure
EnterLearnmode(Refer10.1).Usingthe‘+’and‘-’buttons,select‘ao’.Pressandhold
thetransmitterbuttonuntilthedisplayashes“ao”andbuzzerbeepsfourtimes.
9.2.5. Learn all buttons function
Iffunctionveisselected,allthebuttonsofaremotecontrolorwallswitchwillbe
learnedinthefollowingcongurationandsequence:
1. Button 1 – Open/Stop/Close
2. Button 2 – Light
3. Button 3 – Lock
4. Button 4 – Autoclose override
Operation
TheoperationofFunctionFivewillbeaccordingtothefourdierentfunctions 
described previously.
Learning procedure
EnterLearnmode(Refer10.1).Usingthe‘+’and‘-’buttons,select‘bu’.Pressandhold
thetransmitterbuttonuntilthedisplayashes‘bu’andthebuzzerbeepsvetimes.
9.2.6. Open Only Function
This function allows associated button to only open the door.
Operation
Momentarily pressing the associated button will open the door from any position. If the
doorwasclosingthedoorwillstopandre-open.Thisfunctionhasnoeectifthedooris
open.
Learning procedure
EnterLearnmode(Refer10.1).Usingthe‘+’and‘-’buttons,select‘oo’.Pressandhold
thetransmitterbuttonuntilthedisplayashes‘oo’andthebuzzerbeepssixtimes.
9.2.7. Close Only Function
This function allows associated button to only close the door.
Operation
Momentarily pressing the associated button will close the door from any position. If the
doorwasopeningthedoorwillstopandclose.Thisfunctionhasnoeectifthedooris
closed.
Learning procedure
EnterLearnmode(Refer10.1).Usingthe‘+’and‘-’buttons,select‘co’.Pressandhold
thetransmitterbuttonuntilthedisplayashes‘co’andthebuzzerbeepsseventimes.
SECTION 9
PROGRAMMING REMOTE CONTROLS