Centurion SD04 - Wiring Safety Beams; Photocells; Wiring External Radio Receivers

page 53
www.centsys.com
9.3. Deleting remote controls
• Remote controls can be deleted at any stage
1. Instandbymode(onlya“.”[Dot]displayedontheLEDDisplay),pressthe“Red”
Learn button once.
2. TheLEDDisplaywilldisplay“00”
1
toconrmthattheuserisintheprogramming
menu.
3. PressandHoldgreen“Conrm”buttonuntiltheLightFlashes;whenthescreen
displays“dL”,allremoteshavebeensuccessfullydeleted.
1.Withanemptymemory,‘00’willbedisplayed,otherwiseitwilldisplaythenumberofremoteslearnedintothesystem.
Following this procedure will remove all remote controls and
transmitters from the SDO4’s memory.
PROGRAMMING REMOTE CONTROLS SECTION 9