Cerber C816 - Page 19

19
After choosing the first set of attributes, press [#] key to confirm and the keypad buzzer will sound 3 beeps. Then, the ATTRIBUTES
2
set is displayed. Press
[1] to [8] keys and the related attributes will be activated/deactivated.
After choosing second attribute set, press [#] key again to confirm and the keypad buzzer will sound 3 beeps. Then, the ATTRIBUTES
3
set is displayed. Press
[1] and [2] keys and the related attributes will be activated/deactivated.
After choosing the third set of attributes, press [#] key to confirm, the keypad buzzer will sound 6 confirmation beeps and the panel exits the section, waiting
for a new command to enter another section or [#] key to exit the main programming menu.
Section [002] - Definitions for zone 2
Follow the same procedure as for zone 1 (section [001]).
Section [003] - Definitions for zone 3
Follow the same procedure as for zone 1 (section [001]).
Section [004] - Definitions for zone 4
Follow the same procedure as for zone 1 (section [001]).
Section [005] - Definitions for zone 5
Follow the same procedure as for zone 1 (section [001]).
Section [006] - Definitions for zone 6
Follow the same procedure as for zone 1 (section [001]).
Section [007] - Definitions for zone 7
Follow the same procedure as for zone 1 (section [001]).
Section [008] - Definitions for zone 8
Follow the same procedure as for zone 1 (section [001]).
Section [009] - Definitions for zone 9
Follow the same procedure as for zone 1 (section [001]).
Section [010] - Definitions for zone 10
Follow the same procedure as for zone 1 (section [001]).
Section [011] - Definitions for zone 11
Follow the same procedure as for zone 1 (section [001]).
Section [012] - Definitions for zone 12
Follow the same procedure as for zone 1 (section [001]).
Section [017]: Zone descriptors programming
Edit zone:
, type one 2 digit number
for zone (i.e. zone 12)
Edit zone: 12
_