63
09:33 01/01/05
09:33 01/01/05
Section [099]: Cancellation of any Phone Line Communication
[*][8][Installer’s programming code][099] Command allows to the installer to cut-off any phone communication when he is carrying out a
test.
[*][8][Master Code][099][#] Command allows to the “master” user to stop the voice/sound reporting and communication between panel and PC,
without stopping communication to the “central station”.
Section [100]: Event LOG display on LCD keypads
[*][8][Installer’s programming code][100] Command allows the installer to read panel’s event log on the LCD display in a short and
convenient way.
or
[*][8][Master Code][100] Command allows the “master” user to do the same as installer.
The only operating keys within this section are the [INST] key for master user or installer to see the keypad address, as showed in the picture:
and
the navigation keys [>] for forward event list scroll, one-by-one, and [<] for reverse scroll. Each time the panel accepts the scroll command, will sounds 3 confirmation beeps. In case
of being in the top of the list (on the last event) and press the [>] key or if on display is the last event in the panel LOG and press [<] key, the
keypad is silent and the same event is displayed. Any other key will generate a long beep rejection sound and on the display you can see the
following message:
To Next Page
Loading...