Cerwin-Vega CVE-10 User Manual

CERWIN-VEGA PROFESSIONAL
10
Using the CVE-10/12/15 as a floor/stage monitor
The CVE-10, CVE-12, and CVE-15 can be used as floor monitors by orienting them as shown below. This places them at a
fixed 45-degree angle toward the performers. It is recommended to use MONITOR mode for this application, as it reduces
the volume of frequencies that are prone to feedback. Be sure that the loudspeaker and cables are not located where
they can become a tripping hazard. It is recommended to use right-angle XLR or right-angle ¼” jacks where possible to
avoid cable binding between the loudspeaker and the stage.
STAGE

Cerwin-Vega CVE-10 Specifications

General

Speaker type	-
Speaker position	Front
Speaker placement	Floor
Audio output channels	- channels
Number of woofer drivers	1
Woofer diameter (imperial)	10 \
Amplifier class	D
Product color	Black
Frequency range	50 - 23000 Hz
RMS rated power	1000 W
XLR in	Yes
Connectivity technology	Wired & Wireless
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	286 mm
Width	330 mm
Height	559 mm
Weight	13150 g