Name: Cerwin-Vega CVE-10
Brand: Cerwin-Vega
Rating: 5 (1 reviews)

To Next Page

To Previous Page

CERWIN-VEGA PROFESSIONAL

Rear Panel – Mixer – CVE-18s

DSP MODE SELECT

This button allows one of two EQ presets to be chosen:

LIVE PA – This mode is best used for live music sound. It

has a deeper, more-balanced low-end response.

CLUB/DJ – This mode adds definition and punch to sub

frequencies. It is primarily used for playback of music

styles such as EDM, pop, and hip hop.

OUTPUT SELECT

This button allows one of two frequency outputs to be

chosen:

100Hz HPF – This is a high-pass filter that provides a

crossover to top boxes.

FULL RANGE – This leaves the output jacks at full range.

BLUETOOTH

The CVE series has True Wireless Stereo (TWS) Bluetooth connectivity. To pair a CVE speaker with a streaming

device, push the PAIR/LINK button once. When the PAIR/LINK button begins flashing blue, the speaker will beep

twice and appear in the available Bluetooth devices list on the streaming device. After the speaker is selected and

successfully paired, it will beep once, and the PAIR/LINK button will be lit blue.

To link two CVE speakers together, push and hold the PAIR/LINK button on the first speaker (that has already

been paired with the streaming device). When its PAIR/LINK button begins flashing orange, the first speaker will

beep twice. Then, push and hold the PAIR/LINK button on the second speaker. The PAIR/LINK buttons on both

speakers will blink orange for approximately five seconds before turning solid orange; this indicates that both

speakers are successfully paired and linked to your streaming device. Once linked, the speakers can be toggled

between mono and stereo by double-tapping the PAIR/LINK button on either speaker while audio is playing.

Note: The Bluetooth level knob adjusts the level of the Bluetooth audio input. Beeps will be heard only if the

Bluetooth level is turned up. CVE speakers cannot be paired, unpaired, or linked while audio is playing.

CH1 INPUT and CH2 INPUT

These are balanced combo inputs for balanced XLR/TRS cables. They accept line-level input only.

LEVEL

The LEVEL knob adjusts the output level of the speaker for all channels equally.

CH1 OUTPUT and CH2 OUTPUT

CH1 OUTPUT and CH2 OUTPUT combine the incoming Bluetooth signal with CH1 INPUT and CH2 INPUT,

respectively, for connecting to another powered speaker or a recording device. These outputs are not affected

by changes to the LEVEL knob.

Questions and Answers:

Need help?

Do you have a question about the Cerwin-Vega CVE-10 and is the answer not in the manual?

Cerwin-Vega CVE-10 Specifications

General