CESAB S212 - 11.5 Fitting grease nipples, steering bearings (Option)

© Cesab 11 – 6 T Code(s): 841, 842, 843
Repair manual: Drive gear 2550 Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
11.5 Fitting grease nipples, steering bearings (Option)
1: Clean the surface, remove all dirt from the recess for the grease nipples.
2: Unscrew the stop screws
3: Screw in the grease nipples using an extension piece, 2 each
Step 1
Step 2
Step 3
https://www.forkliftpdfmanuals.com/