Cessna 150K - Page 38

CONTROL SYSTEMS
SPECIAL INSPECTION ITEM
EACH 200 HOURS
EACH 100 HOURS
EACH 50 HOURS
In addition to the items listed below, always check for correct direction of movement,
correct travel and correct cable tension.
1. Cables, terminals, pulleys, pulley brackets, cable guards, turnbuckles
and fair leads
2. Chains, terminals, sprockets and chain guards
3. Trim control wheels, indicators, actuator and bungee
4.
Travel stops.
5. Decals and labeling.
6. Flap control switch, flap rollers and tracks, flap indicator
7. Flap motor, transmission, limit switches, structure, linkage,
bellcranks, etc.
8. Elevator and trim tab hinges, tips and control rods
9. Elevator trim tab actuator lubrication and tab free-play inspection
10. Rudder pedal assemblies and linkage .
11.
Skins (external) of control surfaces and tabs
12. Internal structure of control surfaces
13. Balance weight attachment
14. Flap actuator jack screw threads
2 -24 Change 1
•
•
•
•
•
•
•
•
•
•
•
•
13
14