2.2 Authorising additional master media
All master media must be authorised prior to their first use. The only exceptions are the RF-Ini-
Master (in NET and VA devices) and the RF-Trace-Master.
Required master media:
l System-Master
l Any master media that needs to be authorised
Procedure:
1. Hold the System-Master for ca 1 second in the reading field of the locking device to start
the “authorise mode” of the locking device.
The following signal appears:
1x short green and 1x short beep
2. Now you can authorise any number of master media one after the other by holding each
master media for ca 1 second in the reading field of the locking device.
The following signal appears for each master media:
1x short green and 1x short beep
Page 10 of 39
Signalling of OMEGA FLEX Locking devices
2 Signalling while using the master media
To Next Page
Loading...
