Troubleshooting:
Problem/Signalling Reason Solution
No signal after ca 2 seconds. The
office mode is not active. The
coupling of the locking device
engages, but disengages again
after expiry of the opening
duration.
The locking device is not authorised
for the office function.
Have the locking device
authorised for the office function
by the system administrator.
The office function is not available at
this time.
Enquire with the system
administrator, when the office
function in this locking device can
be activated.
The locking media is not authorised
for the office function.
Have the locking media
authorised for the office function
by the system administrator.
1.3 Deactivating the office mode
Required devices and locking media:
l Locking media, which is authorised for the office function
l Locking device, which is authorised for the office function
Procedure:
1. Hold the locking media authorised for the office function for ca 2 seconds in the reading
field of the locking device.
As soon as the locking media is in the reading field, the following signal appears:
1x long green and 1x long beep
After ca 2 second, another signal appears:
1x long green and 1x long beep, 1x short green and 1x short beep
The office mode is now deactivated. The door can be opened now only with authorised locking
media.
Troubleshooting:
Signalling Reason Solution
After 2 seconds The office mode cannot be deactivated Have your locking media authorised for
Signalling of OMEGA FLEX Locking devices Page 5 of 39
1 Signalling during operation
To Next Page
Loading...
