CEStronics CES OMEGA FLEX - 3 Signalling after Battery Insertion

3 Signalling after battery insertion
Signalling Meaning
Start sequence for offline locking devices: No error
Start sequence for online locking devices:Device is online and is connected to the
Access-Point
Start sequence for online locking devices:Device is online but no connection to
Access-Point is possible
Firmware error. Execute a firmware update. If the problem persists, contact your
CES partner.
In case a system error exists, it will be displayed immediately after the
start sequence, see "System error" on page38.
Signalling of OMEGA FLEX Locking devices Page 35 of 39
3 Signalling after battery insertion