2.18 Transmitting programming jobs with an RF-Stick to a locking
device
Required master media and administration devices:
l RF-Stick-Master
l RF-Stick
l PC with OMEGA Client installed
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through PROGRAMMING > PROGRAM ALL CHANGES.
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under “Programming status”.
Procedure for transmitting programming jobs via an RF-Stick:
Page 32 of 39
Signalling of OMEGA FLEX Locking devices
2 Signalling while using the master media
To Next Page
Loading...
