EasyManuals Logo

CF MOTO ZFORCE Series User Manual

CF MOTO ZFORCE Series
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
79
OPERATING YOUR VEHICLE
CAUTION
During the break-in period:
Do not operate at sustained full throttle. Damage to engine parts or decrease engine life may result if excessive
wide open throttle is used during the rst 20 hours of use.
Do not run engine with throttle over 1/2 open during the rst 10 hours (or 100 miles/160km) of use.
Do not run engine with throttle over 3/4 open during the rst 10 to 20 hours (or the second 100 miles/160km) of
use.
Do not haul or tow heavy cargo.
Use of any oil other than those recommended may cause serious engine damage. CFMOTO recommends the
following oil types:
500cc Engines – 5W-40 oil. Changing engine oil viscosity to 10W-40 or 15W-40 due to hot environments is
acceptable.
800cc and 1000cc Engines
10W-40 oil. Changing engine oil viscosity to 5W-40 due to extreme
cold environments or 15W-40 due to hot environments is acceptable.
Reference the chart below for ambient temperature and viscosity choice.
NOTE:
800 engines contain a wet clutch that requires JASO-certied engine oil, commonly sold as motorcycle engine oil.
Recommended Engine Oil Viscosity
Oil
Viscosity
15W-40
10W-40
5W-40
-22 -4 14 32 50 68 86 104
-30 -20 -10 0 10 20 30 40

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CF MOTO ZFORCE Series and is the answer not in the manual?

CF MOTO ZFORCE Series Specifications

General IconGeneral
BrandCF MOTO
ModelZFORCE Series
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals