1. Overhaul Information
Overhaul Datasheet
Lubricating device
Item
Standard Service
limit
Volume when replacing 1900ml
—
Engine Oil
Capacity
Full capacity 12200 ml
—
Recommended Oil (see original)
●Specially for 4-stroke
motorcycle
SAE-10W-40、20W-50
Substitutes must be used in the
following range.
●API type: SE or SF grade
●SAE type: Choose from the left
chart according to the
environmental temperature
Gap between inner
and outer rotors
0.07~0.15mm 0.20mm
Gap between outer
rotor and body
0.07～0.17mm
0.25mm
Oil pump
Rotor
End face gap
0.05～0.10mm
0.12mm
Fuel Device
Item Standard
Fuel Tank Capacity Full capacity 19.0l
Type MIKUNI BSR36-89
Main jet N102221-130#
Idle jet N224103-22.5#
Carburetor
Idle speed
1300±100r/min
Cooling Device
Item Standard
Full Capacity 1140ml
Reservoir tank capacity 340ml
Coolant
capacity
Standard density 30%
Opening pressure of radiator cap 108kpa(1.1kgf/cm
2
)
Temperature / valve open
72±2C
◦
Temperature/valve full open 88 C
◦
Thermostat
Overall lift 3.5-4.5mm
1-7
To Next Page
Loading...