3. Checks & Adjustment
Adjusting the Absorber
Use special tools to adjust the length of absorber
according to loading requirement
Turn clockwise to adjust from high to low
Gear Shifting
Shift the gear to check for flexibility and gear engagement
Adjust the gearshift rod if necessary
Release the locknut to adjust the length of gearshift rod
Fuel Device
Status of the fuel system
Remove the seat (→2-3)
Check the fuel hose for any aging or damage.
Aged or damaged fuel hose: → Replace
Check if there is cracks or bending with the vacuum tube.
Cracked or bended vacuum tube: → Replace
3-10
To Next Page
Loading...