6. Front Wheel, Front Brake, Suspension, Steering
Special tools
Rod, bearing remover
Head 10mm, bearing remover
Handle A , Driving Tool
Sleeve, Driving Tool 28x30
Guide tool 10mm
Locknut spanner
Bearing remover set
Rotor puller
Remover shaft
Remover hammer
Assembling tool shaft
Troubleshooting
Heavy Steering
¾ Upper thread is over tightened
¾ Steering bearing is damaged or worn
¾ Inner & outer bearing races are damaged, worn
or stepped
¾ Steering stem is distorted
¾ Tire pressure is too low
¾ Low tire pressure
¾ Worn tire
Shaking Handlebar
¾ Steering bearing is damaged, or not well
tightened
¾ Right and left shock absorbers are not matched
¾ Deflected tires
¾ Deformed frame
¾ Worn tires
¾ Shaking of wheel bearing
Vibration of Front Wheel
¾ Wheel rim distorted
¾ Faulty wheel bearing
¾ Faulty tire
Wheel Cannot Turn Freely
¾ Steering bearing is damaged or worn.
¾ Front wheel axle is bended
¾ Brake drag
Front Suspension Is Too Soft
¾ Weakened front shock absorbers
¾ Tire pressure is too low
Front Suspension Is Too Hard
¾ Front shock absorber is bended
¾ Tire pressure is too high
Noise With Front Absorbers
¾ Faulty front shock absorbers
¾ Loosened tightening parts of front shock
absorbers
Poor Brake Efficiency
¾ Faulty brake adjustment
¾ Stained brake disc
¾ Worn brake shoes
¾ Improper tightening of wheel axle
¾ Improper balance of wheels
6-2
To Next Page
Loading...