41
Select source to update "BIOS 1"
Press <Enter> from BIOS 2
<ESC> from Floppy
update from Floppy Disk
B. Boot from BIOS 2
1. Start computer, upon post, press ALT+F2 Keys to enter AWDFLASH setup.
Select the BIOS you want to update:
Press <F1> "BIOS 1"
Press <F2> "BIOS 2"
Press <ESC> to continue Post
Note:
Flash BIOS Protection must be set to Disabled in the Advance Chipset
Feature from the CMOS Setup Utility menu. See Chapter 3.
Don't turn off or restart your system during programming process.
(
(
To Next Page
Loading...
