F.058-B/MODEL 20/SEPT. 2000
2
INTRODUCTION
WELCOME to the family of Challenge® users. Challenge has been developing and manufacturing Graphics Arts
Equipment for over 100 years and is today one of the world’s leading producers and distributors of Paper Cutters,
Paper Drills and Bindery Equipment.
THE CHALLENGE REPUTATION is important to you as a user for the continuous, ready availability of parts and
service.
THIS MANUAL is designed to help you get the most from your Challenge equipment. Keep this manual in a safe,
convenient place for quick reference by operators and service personnel.
SAFETY ALERT! This symbol means CAUTION OR WARNING: Personal safety instructions! Pay
special attention to the instructions in bold type. Personal injury may result if the precautions are not
read and followed.
READ THIS MANUAL BEFORE OPERATING! Follow precautions and instructions given and you should have
years of trouble-free operation. If after reading the manual questions still remain, contact your Authorized Challenge
Dealer.
FOR PARTS AND SERVICE contact the Authorized Challenge Dealer from whom you purchased your machine.
Use the illustrations and parts lists at the back of this manual to identify the correct parts needed. Always give
the SERIAL NUMBER and MODEL of your machine to insure that the correct parts are sent as soon as possible.
Take a few minutes right now to RECORD YOUR MACHINE SERIAL NUMBER in the space provided on the front
cover of this manual. Also be sure to fill out the warranty card accompanying this manual and return it DIRECT TO
CHALLENGE.
If you bought a used machine, it is important to have the following information on record at Challenge. Copy this
page, fill in the information and send it care of: The Challenge Service Department, 1433 Fulton Avenue, Grand
Haven, MI 49417-1594.
CHALLENGE MODEL SERIAL NUMBER
ATTN COMPANY
ADDRESS
CITY STATE ZIP
PHONE DATE INSTALLED
DEALER’S NAME AND CITY
PLEASE REVIEW THE WARRANTY SHEET!
It is very important that you read and understand the conditions outlined in the Warranty Information Sheet. It is
in an envelope attached to the outside of the shipping container.
The Warranty Information Sheet must be filled out completely, returned, and be ON-FILE at THE CHALLENGE
MACHINERY COMPANY in order for the warranty to be issued for this machine.
WARRANTY INFORMATION
Challenge® is a registered trademark of The Challenge Machinery Company. 1433 Fulton Avenue, Grand Haven, MI 49417.
Copyright © 2000 by The Challenge Machinery Company. All rights reserved. Printed in the U.S.A.
NOTICE: UNSUPPORTED PRODUCT!
NO TECHNICAL SUPPORT AVAILABLE!
NO REPAIR PARTS AVAILABLE!
To Next Page
Loading...
